Few things are more aggravating than sitting at home on a hot day, only to find that your air conditioning won’t blow cold. Check these simple troubleshooting steps before you make that costly repair call to rid yourself of common cooling malfunctions.
Check Your Thermostat First
Be sure your thermostat is set to cooling mode and that the temperature on the thermostat setting is lower than it is in the room. Wireless thermostats with dead batteries is an easy fix that might surprise some homeowners. Reboot them and wait a few minutes for the reset to take effect.
Inspect Air Filters
The top culprit of cooling problems are dirty filters. When filters are clogged, they prevent air flow and cause your HVAC to work much harder in return for less coolness. Replace as needed, taking care to check your filters at least once a month; they’ll start looking grey and dirty when it’s time. Cooling performance will be improved fast as long as you are making use of the clean filters. For Air Conditioning Stroud, contact https://acecc.co.uk/air-conditioning-near-me/air-conditioning-stroud/
Clear Outdoor Units
Ensure breathing room for your outdoor condenser. Clean unit of leaves, grass clippings and debris. Pull vegetation back two feet on all sides. When the condenser coil is dirty, it reduces efficiency big time – carefully hose it off if you can see dirt on its surface.
Check Circuit Breakers
Partial system failure can be caused by tripped breakers. Test the AC breaker in the electrical panel; restore if tripped. If you see them go off multiple times, contact a pro right away.
Examine Vents
Open vents and keep them free from obstructions (i.e., do not sit anything on top of a vent or block it with furniture / curtains, etc) Pressure imbalances through closed vents lose the effectiveness of cooling altogether.